Croldino Hand Wash Paste 10L

Product No
Country of Origin
International Barcode
(bucket) G.W. CU'FT
- - -

Capacity: 10L

◆ For workshop, industry, and hobby.
◆ Croldi hand wash paste cleans thoroughly and protects skin from all kinds of oil, grease, and lubricants.
◆ Bio-degradable and clinically tested.

[How To Use]:

1. Use a small amount and spread it to clean your hands.
2. Wash off with water.
3. Avoid contact with eyes.
4. If in contact dwith eyes rinse immediately with water.
5. Keep out of reach of children.

Croldino Hand Wash Paste 10L
related products
  • Car Repair Tool Set GT-2000
    Product NO468.GT2000
    read more
    Car Repair Tool Set

    ◆ Various kinds of special bits
    ◆ Hex 6.35mm
    ◆ 6 pcs / set, including GTB-01 for tire / GTB-02 for removing rust / GTB-03 for car battery / GTB-04 for removing nails and tacks, and one Philips #2 bit and one Slotted 6.0mm bit
    ◆ Weight: 170g
  • DC/AC Clamp Meter TES-3092
    Product NO575.3092
    read more
    DC/AC Clamp Meter TES-3092

    ◆ Compact Size.
    ◆ AC/DC Current Measurement (AC 700A / DC 800A).
    ◆ 600 V AC & 200V DC, Ohm / Continuity Beeper.
    ◆ One Touch DCA Zero.
    ◆ DC Current -
    Range: 200A-800A, Accuracy: ±( 1.5%rdg + 2dgts), Overload protection: 850Vrms
    ◆ AC Current -
    Range: 200A-700A, Accuracy: ±( 2%rdg + 4dgts), Frequency Range: 50 ~ 400Hz, Overload protection: 850Vrms
    ◆ DC Voltage -
    Range: 200V, Resolution: 0.1V, Accuracy: ±(1%rdg + 1dgts), Input Impedance: 1MΩ, Overload protection: 600Vrms
    ◆ AC Voltage -
    Range: 600V, Resolution: 1V, Accuracy: ±(1.5%rdg +4dgts), Frequency Range: 50 ~ 400Hz, Input Impedance: 1MΩ, Overload protection: 600Vrms
    ◆ Resistance -
    Range: 2KΩ, Resolution: 1Ω, Accuracy: ±( 1%rdg+ 2dgts), Overload protection: 600Vrms
    ◆ Continuity beeper: Sound Level ≦30Ω
    ◆ 3-1/2 digit liquid crystal display (LCD) maximum reading 1999
    ◆ Over Range and Low Battery Indication
    ◆ Power: 9V battery*1 pcs
    ◆ Operating Temperature and Humidity: 0℃ to 50℃ (32℉ to 122℉) below 80%RH
    ◆ Dimensions: 192(L) x 64(W) x 31(H)mm
    ◆ Weight: 240g
    ◆ Jaw Opening Diameter: Cables 27 mm
    ◆ Accessories: Carrying case, Battery, Instruction manual and Test leads
  • Long Nose Gripping Screw Removal Pliers PZ-60 Z Engineer
    Product NOEPZ-60
    read more
    Long Nose Gripping Screw Removal Pliers PZ-60 Z Engineer

    Screw Head Size: Dome (Truss) Head/Round or Pan Head: Dia. 2 to 5.5 mm (head height less than 2.2 mm).
    Size: 193mm
    Material: Carbon Steel
    Hardness: HRC60±2
    Cutting Capacity: dia. 1.2mm (Copper Wire)
    Weight: 180g

    ◆ Long nose pliers with non-slip jaws
    ◆ Serrated teeth lined consecutively, inter-meshed with each other, bite and take a hold of an object securely, no slippage! The teeth even hold a thin plate securely.
    ◆ Screw removal - Just Grip & Turn !!
    ◆ Removes small screws with stripped or rusted heads or stubborn fasteners in seconds.
    ◆ Able to deal with small screws in confined space
    ◆ Durable comfort grips
    ◆ Owing to T-shaped forging handles, the handle sleeve will not twist or slip off during heavy duty use.
    ◆ With its specially-designed jaws and vertical serrations, it maximizes friction with no slippage and generate gripping power.
    ◆ Ordinary pliers require strong grip so as to hold a thin plate securely or cut a thin material, while the gripping jaws of Engineer PZ-60 can bite into the material and the cutting blade can cut even a thin wire with less grasping power.
    ◆ The unique T-shape handle helps preventing the handle sleeve from twisting or turning round, good for heavy users.