Electronic Tools

IC Extractor SS-08 Engineer

◆ Ideal for extracting IC (8 to 42 pins)
◆ Squeeze clip and pinch IC tightly.
◆ Fasten the knurled screw cap to keep holding
◆ Length: 125mm
◆ Material: Stainless Steel & PVC

PCB Connector Extractor SS-10 Engineer

◆ Ideal for insertion or extraction of housing connector
◆ Holds PCB connector with accurately machined tip, picking them uprightly and smoothly without cutting wire nor deformity
◆ Accurate tip design to insert and extract straight and right-angle PCB connectors mounted on highly-dense PCB

Spare Tube For SS-02 2pcs/set SS-16 Engineer

Package Included: 2pcs/set
Length: 50mm
Outer Dia.: 4mm
Inner Dia.: 2mm
Material: Silicon

Spring Hook SS-21 Engineer

◆ Ideal for inserting, removing, and adjusting coil springs of electronic components or precision instruments
◆ Suitable for removing connector leads, aligning leads of resistor or condenser and testing arrangements of wires.
◆ 3mm diam. x 215mm overall length 　　　　 　　　

Spring Hook SS-22 Engineer

◆ Ideal for inserting, removing, and adjusting coil springs of electronic components or precision instruments
◆ Suitable for removing connector leads, aligning leads of resistor or condenser and testing arrangements of wires.
◆ 3mm diam. x 215mm overall length　　　 　　　

Pin Extractor 1.9mm/2.5mm SS-30 Engineer

◆ Ideal for extraction of crimp contact pin and socket from terminal housing
◆ Inner Diam. of Sleeve: 1.9mm
◆ Outer Diam. of Sleeve: 2.5mm
◆ Sleeve: 12mm
◆ Overall Length: 64mm
◆ Stroke of Ejector: 21mm
◆ Surface Material: Stainless brass

Pin Extractor 2.1mm/2.7mm SS-31 Engineer

◆ Ideal for extraction of crimp contact pin and socket from terminal housing
◆ Inner Diam. of Sleeve: 2.1mm
◆ Outer Diam. of Sleeve: 2.7mm
◆ Sleeve: 12mm
◆ Overall Length: 64mm
◆ Stroke of Ejector: 21mm
◆ Surface Material: Stainless brass

Pin Extractor 2.4mm/2.9mm SS-32 Engineer

◆ Ideal for extraction of crimp contact pin and socket from terminal housing
◆ Inner Diam. of Sleeve: 2.4mm
◆ Outer Diam. of Sleeve: 2.9mm
◆ Sleeve: 12mm
◆ Overall Length: 64mm
◆ Stroke of Ejector: 21mm
◆ Surface Material: Stainless brass

Pin Extractor 3.1mm/3.6mm SS-33 Engineer

◆ Ideal for extraction of crimp contact pin and socket from terminal housing
◆ Inner Diam. of Sleeve: 3.1mm
◆ Outer Diam. of Sleeve: 3.6mm
◆ Sleeve: 12mm
◆ Overall Length: 64mm
◆ Stroke of Ejector: 21mm
◆ Surface Material: Stainless brass

Pin Extractor 2.7mm/3.2mm SS-34 Engineer

◆ Ideal for extraction of crimp contact pin and socket from terminal housing
◆ Inner Diam. of Sleeve: 2.7mm
◆ Outer Diam. of Sleeve: 3.2mm
◆ Sleeve: 12mm
◆ Overall Length: 64mm
◆ Stroke of Ejector: 21mm
◆ Surface Material: Stainless brass