ESD-safe Parallel Nippers Super-fine Normal Blade NZ-12G

◆ Full flush and super-fine cutting edge
◆ Ideal fo cutting an IC lead of a narrow-pitch QFP or SOP with slender shears (0.3mm+0.3mm width at top)
◆ Ergonomic ESD-safe elastomer handle for comfort gripping
◆ Light weight, 45g only
◆ Enables you to make flush cut of a lead easily and prevents stripping or solder crack on the circuit board
◆ Unique structure of parallel handle for you to hold shears horizontally without raising up your elbow
◆ Overall Length: 125mm
◆ Grip Width: 50mm
◆ Jaw Width: 10mm
◆ Blade Length: 7mm
◆ Material: S55C
◆ Cutting Capacity: copper wire dia. 0.6mm

ESD-safe Parallel Nippers Super-fine Reverse Blade NZ-13G

◆ Full flush and super-fine cutting edge
◆ Ideal fo cutting an IC lead of a narrow-pitch QFP or SOP with slender shears (0.3mm+0.3mm width at top)
◆ ESD-safe ergonomic elastomer handle for comfort gripping
◆ Light weight, 45g only
◆ Enables you to make flush cut of a lead easily and prevents stripping or solder crack on the circuit board
◆ Reverse blade makes it possible to cut IC lead in front of user with the best view while holding nippers vertically against circuit board
◆ Overall Length: 125mm
◆ Grip Width: 50mm
◆ Jaw Width: 10mm
◆ Blade Length: 7mm
◆ Material: S55C
◆ Cutting Capacity: copper wire dia. 0.6mm

Combination Scissors 2-in-1 PE Grip EPH-50 Engineer

◆ Trimming various objects which you could not cut with ordinary scissors such as nylon fiber, cabtire cord, etc.
◆ Fine and flush cut
◆ Blade Material: Stainless Steel
◆ Soft grip made of PE
◆ Hardness: HRC52-56
◆ Overall Length : 170mm
◆ Weight : 58 g
◆ With both notched blade and U-type blade for different applications, notched blade for cutting Nylon/Kevlar fiber, Copper braided wire, Aluminum/Copper sheet (max. 0.5mm thick), Plastic plate / PET (max. 1.0mm thick), U-type blade for Copper wire (dia. 1.5mm max.), Cabtire cord, Cotton braided cord, Cotton insulated cord.

Screw Rust Removal Liquid ZC-28 Engineer

Capacity: 100ml
Chemical Compound: Ammonium Thioglycolate

◆ Neutral liquid makes working safely. No acid or alkali contains.
◆ Especially designed to remove rust on small components, such as rusted screws.
◆ Rust can be removed in seconds!

[User Manual]:

1. Apply enough liquid to the rusted screw.
2. The liquid immediately reacts with the rust and turns purple.
3. Remove the screw after sufficient penetration.
4. Rinse it in water after rust removal.
5. Be sure to apply anti-rust agent.
6. Be aware of stains and tarnish on the metal parts around the screw.

[Caution]:

1. Wear protective equipment such as eyeglasses, gloves, etc. while working to avoid contact with eyes and skin.
2. Wash your hands after use, and gargle with clean water.
3. Keep out of reach of children.
4. Store in a cool and dry place, out of direct sunlight.
5. This product has a peculiar smell.
6. Do not inhale or drink.
7. Do not mix with other chemicals.
8. In case of eye contact, immediately flush the eye with clean water for at least 15 minutes and seek medical attention.
9. If swallowed, drink plenty of water and seek medical attention.
10. If inhaled, immediately move to a place of fresh air and rest and seek medical attention if you feel unwell.
11. In case of skin contact, immediately rinse thoroughly with clean running water.

Display Box For Screw Rust Removal Liquid ZC-28 Engineer

Size of Display Box: 220x220x30mm

Introduction For Screw Rust Removal Liquid ZC-28

Capacity: 100ml
Chemical Compound: Ammonium Thioglycolate

◆ Neutral liquid makes working safely. No acid or alkali contains.
◆ Especially designed to remove rust on small components, such as rusted screws.
◆ Rust can be removed in seconds!

[User Manual]:

1. Apply enough liquid to the rusted screw.
2. The liquid immediately reacts with the rust and turns purple.
3. Remove the screw after sufficient penetration.
4. Rinse it in water after rust removal.
5. Be sure to apply anti-rust agent.
6. Be aware of stains and tarnish on the metal parts around the screw.

[Caution]:

1. Wear protective equipment such as eyeglasses, gloves, etc. while working to avoid contact with eyes and skin.
2. Wash your hands after use, and gargle with clean water.
3. Keep out of reach of children.
4. Store in a cool and dry place, out of direct sunlight.
5. This product has a peculiar smell.
6. Do not inhale or drink.
7. Do not mix with other chemicals.
8. In case of eye contact, immediately flush the eye with clean water for at least 15 minutes and seek medical attention.
9. If swallowed, drink plenty of water and seek medical attention.
10. If inhaled, immediately move to a place of fresh air and rest and seek medical attention if you feel unwell.
11. In case of skin contact, immediately rinse thoroughly with clean running water.