HomeHardware ToolsAdhesive / Rust Removal / Solvent DispenserDisplay Box For Screw Rust Removal Liquid ZC-28 Engineer
Display Box For Screw Rust Removal Liquid ZC-28 Engineer
Display Box For Screw Rust Removal Liquid ZC-28 Engineer
Size of Display Box: 220x220x30mm
Introduction For Screw Rust Removal Liquid ZC-28
Capacity: 100ml
Chemical Compound: Ammonium Thioglycolate
◆ Neutral liquid makes working safely. No acid or alkali contains.
◆ Especially designed to remove rust on small components, such as rusted screws.
◆ Rust can be removed in seconds!
[User Manual]:
1. Apply enough liquid to the rusted screw.
2. The liquid immediately reacts with the rust and turns purple.
3. Remove the screw after sufficient penetration.
4. Rinse it in water after rust removal.
5. Be sure to apply anti-rust agent.
6. Be aware of stains and tarnish on the metal parts around the screw.
[Caution]:
1. Wear protective equipment such as eyeglasses, gloves, etc. while working to avoid contact with eyes and skin.
2. Wash your hands after use, and gargle with clean water.
3. Keep out of reach of children.
4. Store in a cool and dry place, out of direct sunlight.
5. This product has a peculiar smell.
6. Do not inhale or drink.
7. Do not mix with other chemicals.
8. In case of eye contact, immediately flush the eye with clean water for at least 15 minutes and seek medical attention.
9. If swallowed, drink plenty of water and seek medical attention.
10. If inhaled, immediately move to a place of fresh air and rest and seek medical attention if you feel unwell.
11. In case of skin contact, immediately rinse thoroughly with clean running water.
Display Box For Screw Rust Removal Liquid ZC-28 Engineer
-
Product NOEDBZ-60Rapid Screw Extractor DBZ-60 Engineer
◆ Having problem in removing flat and damaged screws? Use this ENGINEER screw removal tool to tackle these difficult screws!
◆ 2-in-1 Screw Extractor, time-saving rapid screw removal tool.
◆ Simply press down on the screw & twist it out!!
◆ High-torque handle grip - standard 6.35mm (1/4") hex drive.
Material:
◎ Bits:Carbon Steel
◎ Sleeve:Elastomer (TPR)
◎ Handle Grip:ABS, Nylon
Package included,
◎ Bits (DBZ-51 & DBZ-52)
◎ Shock-absorbable rubber sleeve
◎ High-torque handle grip (W:100mm) -
Product NOEPZ-60Long Nose Gripping Screw Removal Pliers PZ-60 Z Engineer
Screw Head Size: Dome (Truss) Head/Round or Pan Head: Dia. 2 to 5.5 mm (head height less than 2.2 mm).
Size: 193mm
Material: Carbon Steel
Hardness: HRC60±2
Cutting Capacity: dia. 1.2mm (Copper Wire)
Weight: 180g
◆ Long nose pliers with non-slip jaws
◆ Serrated teeth lined consecutively, inter-meshed with each other, bite and take a hold of an object securely, no slippage! The teeth even hold a thin plate securely.
◆ Screw removal - Just Grip & Turn !!
◆ Removes small screws with stripped or rusted heads or stubborn fasteners in seconds.
◆ Able to deal with small screws in confined space
◆ Durable comfort grips
◆ Owing to T-shaped forging handles, the handle sleeve will not twist or slip off during heavy duty use.
◆ With its specially-designed jaws and vertical serrations, it maximizes friction with no slippage and generate gripping power.
◆ Ordinary pliers require strong grip so as to hold a thin plate securely or cut a thin material, while the gripping jaws of Engineer PZ-60 can bite into the material and the cutting blade can cut even a thin wire with less grasping power.
◆ The unique T-shape handle helps preventing the handle sleeve from twisting or turning round, good for heavy users. -
Product NOEPZ-32Length: 160mm
Hardness: HRC60+/-2
Material Body: Carbon Steel
Material Handles: TPR
Weight: 125g
Cutting Capacity: Φ1.2㎜ copper wire
Screw Head: dia. 3 to 9.5㎜
◆ Vertical serrations bite and grip a screw head without slippage.
◆ Serrated side teeth lined consecutively, inter-meshed with each other.
◆ Elaborate angle of serrations also enables you to bite a dome head.
◆ Black oxide finish to increase rust-resistance!
◆ Slender design of jaws ideal for work in confined area.
◆ Comfortable grips made of Elastomer (TPR), also good for global environment.
◆ Strap hole goes through the steel handle.
◆ With Wide blades can cut Φ1.2㎜ copper wire. -
Product NOEZC-28Screw Rust Removal Liquid ZC-28 Engineer
Capacity: 100ml
Chemical Compound: Ammonium Thioglycolate
◆ Neutral liquid makes working safely. No acid or alkali contains.
◆ Especially designed to remove rust on small components, such as rusted screws.
◆ Rust can be removed in seconds!
[User Manual]:
1. Apply enough liquid to the rusted screw.
2. The liquid immediately reacts with the rust and turns purple.
3. Remove the screw after sufficient penetration.
4. Rinse it in water after rust removal.
5. Be sure to apply anti-rust agent.
6. Be aware of stains and tarnish on the metal parts around the screw.
[Caution]:
1. Wear protective equipment such as eyeglasses, gloves, etc. while working to avoid contact with eyes and skin.
2. Wash your hands after use, and gargle with clean water.
3. Keep out of reach of children.
4. Store in a cool and dry place, out of direct sunlight.
5. This product has a peculiar smell.
6. Do not inhale or drink.
7. Do not mix with other chemicals.
8. In case of eye contact, immediately flush the eye with clean water for at least 15 minutes and seek medical attention.
9. If swallowed, drink plenty of water and seek medical attention.
10. If inhaled, immediately move to a place of fresh air and rest and seek medical attention if you feel unwell.
11. In case of skin contact, immediately rinse thoroughly with clean running water.