Jeweler's Saw (88 mm Depth)

Saw Blade Set

Application: Rubber, Wood
No.: #7
Blade Thickness: 0.45mm
Teeth Per Inch: 15

◆ Every pack contains 144pcs
◆ Must screw until tight to prevent damage
◆ Provide precise cuts every time you use

Method Of Installation:

1. Adjust the saw to the length of sawblade. (Fixed saw do not have to adjust)
2. Lossen upper and lower screw on the saw.
3. Clip the sawblade by upper and lower iron slip.
4. Put the handle on chest and pull a bit.
5. Adjust the position of the sawblade, and tighten the screw
6. After tighten the screw, you can take off the saw from your chest. The saw will relax and the sawblade will tighten.
7. Poke the sawblade gently to ensure if it is tightened.