TES Brand:
TES
Safety Verification

Digital Earth Tester

Product No
575.1605
Country of Origin
Taiwan
International Barcode
4716044025492
Packing
(sets) G.W. CU'FT
- - -
inquiry
description

Digital Earth Tester

◆ Capable of measuring earth voltage.
◆ Data hold function.
◆ Auto power off function:
◆ The timer operates automatically about 10 minutes when the “ Test Button Switch ”are pressed to keep the tester power on.
◆ 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.
◆ In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accessories.
◆ Automatic warning when resistance of auxiliary earth spike is in excess of tolerance.
◆ Designed to meet EN 61010-1/ / EN 61557 safety standard.
◆ Zero ohm adjustment.
◆ Safety Standard : EN 61010-1 overvoltage category Ⅲ,EN 61557.
◆ Display : 3 1/2 digit liquid crystal display with a maximum reading of 1999.
◆ Insulation Resistance : More than 5MΩ between the circuit and the housing case when measured with 300VDC.
◆ Withstand Voltage : 3700CV AC for 1 minute between the circuit and the housing case.
◆ Timer (Auto power off) : about 10 minutes.
◆ Dimensions : 165(L) ×100(W) ×57(H)mm
◆ Weight : Approx. 500g (with battery).
◆ Power Source : DC 9V (6’1.5V size “AA” battery or equivalent).
◆ Over range Indication : “ 1- - - - ” will be shown on the LCD panel when out of range measurement is made.
◆ Operating Temperature and Humidity : 0℃ to 40℃ (32℉ to 104℉) , below 80% RH.
◆ Storage Temperature : -10℃to 60℃ (14℉ to 140℉)
◆ Accessories : Test leads 1 set, Auxiliary earth spikes 2 pcs, Battery 6 pcs, Carrying case, Manual.
◆ Measuring Range and Accuracy ( at 23℃ and 45-75%RH )
Earth Voltage - Range: 0 ~ 199.9V (50Hz, 60Hz), Accuracy: ±(1%rdg + 4dgts), Overload Protection: 300Vrms / 1 minute
Earth Resistance - Range: 0 ~19.99Ω, Accuracy: ±(2%rdg + 0.1Ω), Overload Protection: 200Vrms / 10 seconds
- Range: 0 ~ 199.9Ω, Accuracy: ±(2%rdg+3dgts), Overload Protection: 200Vrms / 10 seconds
- Range: 0 ~ 1999Ω, Accuracy: ±(2%rdg+3dgts), Overload Protection: 200Vrms / 10 seconds
◆ Current Consumption ( typical Value with battery voltage of 9V )
Range: 20Ω/ 200Ω/2000Ω, ON: 42mA
Range: Earth V, ON: 22mA


Digital Earth Tester
related products
  • KOTELYZER 70B Butane Solder
    Product NO525.7000
    read more
    KOTELYZER 70B Butane Solder (Made in Japan)

    Model: 70B

    Overall Length: 243mm
    Weight: 90g
    Soldering iron temp.: 200~500℃ (20~80W)
    Hot blower: 600℃
    Torch: 1300℃
    Gas container capacity: 28ml
    Operation time: 120mins
    Fuel: Use pure butane to ensure normal lifetime

    ◆ Lighter ignition.
    ◆ 3 in 1: Soldering iron function, hot blower function and torch function.
    ◆ Comes with 525.7001 soldering tip (model: 70-01-01), 525.7052 hot blow tip (model: 70-01-52), 525.7055 heat shrink (model: 70-01-55), 525.7026 torch ejector (model: 70-07TU), spanner (model: 70-35), metal carrying case (model: 72-40U), cleaning case with sponge (model: 70-37) and iron holder (model: 70-43).
    ◆ Comes with full kit and metal carrying case.
  • Tool Kit (20 pcs / set)
    Product NOEKS-06
    read more
    Tool Kit (20 pcs / set)

    ◆ Ideal for field maintenance service
    ◆ This kit includes,
    ◎ 150mm Slant edge nippers
    ◎ 150mm Long nose pliers
    ◎ 150mm Side cutting pliers
    ◎ 150mm Combination pliers
    ◎ 125mm Tweezers
    ◎ Screwdriver Philips #00
    ◎ Screwdriver Philips #0
    ◎ Screwdriver Philips #2
    ◎ Screwdriver Slotted 3mm x 75mm
    ◎ Screwdriver Slotted 5.5mm x 100mm
    ◎ Nut driver 5.5mm hex
    ◎ 150mm Alignment driver
    ◎ Ceramic Soldering Iron (32W/100V) (SKC-30: 30W/220-240V)
    ◎ 20g Solder wire
    ◎ 200mm Adjustable angle wrench
    ◎ File (flat)
    ◎ File (round)
    ◎ 150mm Steel rule
    ◎ Hex key wrench set (8-in-1)
    ◎ Cutter knife (S)
    ◆ Case Size : 305 x 220 x 50mm
    ◆ Weight : 2 kgs
  • Level, 8-Inch Magnetic Bubble Level with Adjustable Vial
    Product NO026.708
    read more
    Level, 8-Inch Magnetic Bubble Level with Adjustable Vial

    [Specifications]:

    Length: 205mm
    Width: 52mm
    Thickness: 18mm
    Material: Plastic

    [Features]:

    ◆ 3 vials, 0°, 90°, Adjustable.
    ◆ Adjustable vial allows angle transfer between multiple surfaces with different slopes.
    ◆ With Lock/Unlock knob, the required angle can be locked without having to worry about angle change when moving.
    ◆ With 172 x 8 m/m magnet on the base, the level can be attached onto any metal surface easily.
    ◆ Ideal not only for straight line measurement, also great when measuring level for specific angle of a slope is required.
    ◆ Also applicable in decorations for Thanksgiving and Christmas.
    ◆ Light weight and pocket size.
  • 25-Foot Long 25mm Wide Inch/Metric Measuring Tape
    Product NO118.3725
    read more
    25-Foot Long 25mm Wide Inch/Metric Measuring Tape

    Width: 25mm
    Length: 7.5M or 25 foot

    ◆ Retractable automatically.
    ◆ With belt clip and wrist belt for easy transportation.
    ◆ Triple-riveted hook.
    ◆ Shock-proof ABS case.
Top