ENGINEER Brand:
ENGINEER
Safety Verification

1st Bit For Rapid Screw Extractor

Product No
EDBZ-51
Country of Origin
Japan
International Barcode
4989833014513
Packing
(pcs) G.W. CU'FT
10 0.33KG 0.025'
inquiry
description

1st Bit For Rapid Screw Extractor

◆ Having problem in removing flat and damaged screws? Use this ENGINEER screw removal tool to tackle these difficult screws!
◆ For slightly damaged flat screws
◆ 4 edges of the cross tip can firmly grip the remaining corners of Phillips recess.
◆ Length: 105mm
◆ Weight: 27g
◆ Please follow the following steps when applying this bit:
1. Insert the 1st Bit into the handle grip and grip it as illustrated below.
2. Place the bit tip into the screw head, then scrape away burs in the recess by twisting it back and forth lightly.
3. Do not attempt to hit the 1st Bit with a hammer.
4. After you feel the bit tip catches the corner of recess, give a jerk counterclockwise while pressing firmly downward.















1st Bit For Rapid Screw Extractor
related products
  • Rapid Screw Extractor DBZ-60 Engineer
    Product NOEDBZ-60
    read more
    Rapid Screw Extractor DBZ-60 Engineer

    ◆ Having problem in removing flat and damaged screws? Use this ENGINEER screw removal tool to tackle these difficult screws!
    ◆ 2-in-1 Screw Extractor, time-saving rapid screw removal tool.
    ◆ Simply press down on the screw & twist it out!!
    ◆ High-torque handle grip - standard 6.35mm (1/4") hex drive.

    Material:
     ◎ Bits:Carbon Steel
     ◎ Sleeve:Elastomer (TPR)
     ◎ Handle Grip:ABS, Nylon
    Package included,
     ◎ Bits (DBZ-51 & DBZ-52)
     ◎ Shock-absorbable rubber sleeve
     ◎ High-torque handle grip (W:100mm)





  • 4
    Product NO504.C4NN
    read more
    4" Long Nose Locking Pliers C.H. HANSON

    Overall Length: 4" (100mm)
    Material: Chrome molybdenum steel

    ◆ Easy squeeze release lever.
    ◆ Durable design.
    ◆ Wide applications and your best tool for gripping screws and tubes.
    ◆ 4" Locking Pliers is more suitable than 10" Locking Pliers for you in hard-to-reach areas.
  • Rust Removal Liquid ZC-28 Engineer
    Product NOEZC-28
    read more
    Screw Rust Removal Liquid ZC-28 Engineer

    Capacity: 100ml
    Chemical Compound: Ammonium Thioglycolate

    ◆ Neutral liquid makes working safely. No acid or alkali contains.
    ◆ Especially designed to remove rust on small components, such as rusted screws.
    ◆ Rust can be removed in seconds!

    [User Manual]:

    1. Apply enough liquid to the rusted screw.
    2. The liquid immediately reacts with the rust and turns purple.
    3. Remove the screw after sufficient penetration.
    4. Rinse it in water after rust removal.
    5. Be sure to apply anti-rust agent.
    6. Be aware of stains and tarnish on the metal parts around the screw.

    [Caution]:

    1. Wear protective equipment such as eyeglasses, gloves, etc. while working to avoid contact with eyes and skin.
    2. Wash your hands after use, and gargle with clean water.
    3. Keep out of reach of children.
    4. Store in a cool and dry place, out of direct sunlight.
    5. This product has a peculiar smell.
    6. Do not inhale or drink.
    7. Do not mix with other chemicals.
    8. In case of eye contact, immediately flush the eye with clean water for at least 15 minutes and seek medical attention.
    9. If swallowed, drink plenty of water and seek medical attention.
    10. If inhaled, immediately move to a place of fresh air and rest and seek medical attention if you feel unwell.
    11. In case of skin contact, immediately rinse thoroughly with clean running water.
Top