Power Tools

◆ Input: 220V 0.29A
◆ Output: 48W
◆ Collet Capacity: 0.5 ~ 3.2mm
◆ Speed: 12000 rpm
◆ Size: 150 xΦ42.5 mm
◆ Weight: 310g (N.W.)
◆ Package included Grinding Stone x 1, Drill Bit x 1, Collet Nut x 4
◆ Easy To Use – This handheld tool is very easy to use for drilling, grinding, engraving, and polishing.
◆ This drill also can be used together with Mini Drill Press Stand P/N 265.030 when drilling on PCB

Mini Drill Stand

◆ An easy-to-operate and a must-have tool for drilling through circuit boards and protoboards.
◆ Functions like a drill press to hold a mini electric drill and makes accurate drilling possible.
◆ Easy to set up and can be adjusted according to the diameter of drill with interchangeable V-shape and U-shape of clamps.
◆ Ideal for mini driller such as P/N 265.002.

Dimension: 100x130x215mm (3.9" x 5.1" x 8.4")
Capacity: 35-55mm, 35-44mm, 52-85mm (Please see photos below.)
Material: PVC base and iron shaft

Octopus Electric Engraver Tungsten Carbide Point Tip 110V

[Specifications]:

Input: 110V
Power: 22W 0.2A
Weight: 260g
7200 strokes per minute
Origin: Tungsten carbide point tip is made in USA and the body of the engraver is made in Taiwan

[Features]:

1. Easy To Use – You can simply plug in and the engraver is ready to work! As easy as holding a pen.
2. Wide Application – This engraver can be applied on stone, glass, and metal. You can use it on most of the surfaces when engraving is needed.
3. Adjustable – 5-position stroke adjustment to regulate the engraving depth from 0.1 – 1 mm.
4. Multifunctional Purposes - With this tool you can mark your valuables to protect them from being lost or engrave your name directly to make your personal belongings easier to spot. This tool has being used by worldwide jewelers in creating their artworks and adopted by DIY enthusiasts.
5. Safety - High-impact plastics and double insulated body provide safety and assure no electricity leakage.
6. Great Value - One spare tungsten carbide tip angled at 60° is included in the set.

[Cautions]:

Please always wear eye protection while using and do not fall electric engraver down nor make it run without actually engraving.

Tungsten Carbide Tip for Electric Engraver

◆ Dimension: 3 mm x 20 mm, 60 degree
◆ Specifically used in Electric Engraver when dealing with metal surfaces
◆ Perfect part for P/N 270.000 and P/N 270.001 Electric Engraver

Diamond Tip for Electric Engraver

◆ Dimension: 3 mm x 20 mm, 90 degree
◆ Specifically used in Electric Engraver when dealing with stones and glasses
◆ Perfect part for P/N 270.000 and P/N 270.001 Electric Engraver

With this tool you can mark your valuables to protect them from being lost or engrave your name directly to make your personal belongings easier to spot. This tool has being used by worldwide jewelers in creating their artworks and adopted by DIY enthusiasts.

Voltage: 220V
Power: 33W 0.15A
Strokes Per Minute: 7200
Weight: 260g
Material of Outer Case: Nylon
Material of Tip: Tungsten Carbide
Plug Type: C Type

Wide Applications - Reciprocating replaceable tungsten carbide tip can be applied on metal, stainless steel, marble, glass, plastic, wood and other materials whenever engraving is needed.

Light Weight - It weighs only 260g, its light-weight feature makes it highly maneuverable.

Great Value - One spare tungsten carbide tip angled at 60° is included in this set.

Thoughtful Product Design - Independent on/off switch located in the bottom of the engraving tool allows users to hold the body of tool without easily touching the switch and causing unwanted pause when operating. The best of all is by turning 5 levels of stroke control knob, users are able to adjust the depth of engraving from 0.1 to 1mm and create from fine lines to deep grooves.

Safety - High-impact plastics and double insulated body provide safety and assure no electricity leakage.

Advanced Accessories - Our diamond tip P/N 270.00002 is recommended when engraving on harder materials and can be purchased additionally.

Pleasant User Experience - It's easy to use even for beginners. Adjust to stroke level 1 before plugging in. Then turn on the switch and you are ready for marking in your own way!

Origin & Quality - Replaceable tungsten carbide point tip is made in USA and the body of the engraver is made in Taiwan. CE approved.

[Cautions]: Please always wear eye protection while using and do not fall electric engraver down nor make it run without actually engraving.

Adapter 3V-1A

◆ Output: DC 3V DC 1A (1000mA) / Input: AC 100-240V

Adaptor 4.5V-1A

◆ Output: DC 4.5V DC 1A (1000mA) / Input: AC 100-240V

Adapter 5V-1A

◆ Output: DC 5V DC 1A (1000mA) /AC 100-240V

Adapter with USB port, 5V-1A

◆ Output: DC 5V DC 1A (1000mA) / AC 110-240V