Cloth Tape for Impulse Sealer, 12" x 12"
Cloth Tape for Impulse Sealer, 12" x 12"
Among all spare parts and accessories for impulse sealers S-Turbo offers, the insulating, wear-resistant and high-temperature-resistant cloth tape made by Teflon/PTFE is one of the key components that needs to be replaced from time to time to maintain sealing performance. S-Turbo has PTFE cloth tape in various sizes and packages, for tool distributors that require specific sizes, shapes or units to be included in a single package, please feel free to discuss with S-Turbo. We're here to explore the possibilities with you!
[Specifications]:
Size: 12" x 12"
Material: Teflon/PTFE
[Features]:
◆ With insulating, wear-resistant and high-temperature-resistant features, these Teflon sheets can sustain 200℃ and make them suitable as cloth tapes for sealing machines.
◆ Once the original tapes are worn out, please replace with these new Teflon cloth tapes. The sealing or cutting effect of impulse sealers will soon be improved.
◆ It's recommended to check the sealing size of your impulse sealer first before purchasing the cloth tape to make sure the compatibility.
◆ Not only applicable to impulse sealer machines, where heat resistance or high insulation is required, these Teflon/PTFE cloth tapes are great as the shielding sheets. These cloth can be cut freely in any shapes to fit your sealing or shielding requirements.
Cloth Tape for Impulse Sealer, 12" x 12"
-
Product NO223.120Foot Pedal Impulse Sealer (12", 110 V)
◆ Application: PP, PE, PVC bag
◆ Voltage: 110V
◆ Power: 400 W
◆ Weight: 18 kg
◆ Perfect for retail, grocery stores and industrial sealing use. -
Product NO240.000Glue Gun 10W
[Specifications]:
Input: 100-240V
Power: 10W
Package Included: 2 pieces of 5/16x4" glue sticks
[Features]:
◆ For DIY and art projects, such as paper craft, holiday decorations, floristry, or fixing a broken toy.
◆ Easy and handy bonding solution.
[Manual & Safety Cautions]:
1. Plug in the gun. Load the glue sticks into the back of the gun.
2. Press trigger several times until the glue stick is firmly set into the tube.
3. Allow the glue gun to warm up for approximately 5 minutes.
4. Squeeze trigger until glue flows from nozzle.
5. Glue need not to be spread. Press surfaces together within 15 seconds. Clean surfaces for best bonding.
6. Unplug glue gun when finishing. It's important to unplug the glue gun if not using, and after using, make sure it remains upright on its safety stand instead of lying on its side.
7. Never touch the nozzle. Flush with cold water immediately if any contact.
8. Never pull the glue stick out from the back of the glue gun. Please keep the partially-melted glue sticks stay inside the glue gun without pulling it out.
9. Please keep glue gun away from reach of children and pets. -
Product NO240.150Dual Temperature Heat Gun 1500W 110V
Heat gun is a versatile tool with wide applications. Most commonly, it is used to strip paint, adhesives, plaster, spackle, and floor tiles. This tool is also widely used for shrink wrapping of plastic in packing and heat shrink tubing in strengthening and protecting the wire connections. Aside from these common applications, the heat gun can also be used as a finishing tool for post-processing in 3D printing. By its heat, it melts away unwanted plastic parts of 3D printed objects.
To ensure safer user experience, please always follow the safety instructions and read the manul before using. And please keep distance at 7cm between heat gun and the object being heated. If the distance is closer than 7cm, the heat outflowed will not have enough space to ventilate and cause overheat inside the heat gun. When using or handling the heat gun, please prevent it from falling off otherwise the inner parts may be broken by strong force. For more safety instructions, please read the manul include in the package.
[Specifications]:
Input Voltage: 110V
Power Input: 1500W
Power Output: 1250W
[Features]:
◆ Dual temperature settings at 315℃ and 600℃.
◆ A versatile tool with wide applications. Most commonly, it is used to strip paint, adhesives, plaster, spackle, and floor tiles. This tool is also widely used for shrink wrapping of plastic in packing and heat shrink tubing in strengthening and protecting the wire connections. Aside from these common applications, the heat gun can also be used as a finishing tool for post-processing in 3D printing. By its heat, it melts away unwanted plastic parts of 3D printed objects.
◆ Please always follow the safety instructions and read the manul before using.
◆ Please keep distance at 7cm between heat gun and the object being heated. If the distance is closer than 7cm, the heat outflowed will not have enough space to ventilate and cause overheat inside the heat gun.
◆ When using or handling the heat gun, please prevent it from falling off otherwise the inner parts may be broken by strong force. -
Product NO422.000Multipurpose Dolly, 2 Unfixed Plus 2 Fixed Wheels
[Specifications]:
Outer dimension: 660 x 460 x 140mm
Inner dimension: 650 x 430 x 120mm
Moving up to 200-300kgs
Material: PP
Wheels: 2 unfixed plus 2 fixed 3" PU wheels
Weight: 6kg
[Features]:
◆ Ideal for personal use or for packing, food, logistic, and any other industries.
◆ Lightweight and durability make it ideal for anyone who needs to move heavy items around.
◆ Perfect for home or office packing.