Octopus Brand:
Octopus
Safety Verification

Glue Gun 40W

Product No
240.012
Country of Origin
Taiwan
International Barcode
4716044015073
Packing
(pcs) G.W. CU'FT
12/48 11.232KG 3.528'
inquiry
description

Glue Gun 40W

[Specifications]:

Input: 100-240V
Power: 40W
Package Included: 2 pieces of 7/16x4" glue sticks

[Features]:

◆ For DIY and art projects, such as paper craft, holiday decorations, floristry, or fixing a broken toy.
◆ Easy and handy bonding solution.

[Manual & Safety Cautions]:

1. Plug in the gun. Load the glue sticks into the back of the gun.
2. Press trigger several times until the glue stick is firmly set into the tube.
3. Allow the glue gun to warm up for approximately 5 minutes.
4. Squeeze trigger until glue flows from nozzle.
5. Glue need not to be spread. Press surfaces together within 15 seconds. Clean surfaces for best bonding.
6. Unplug glue gun when finishing. It's important to unplug the glue gun if not using, and after using, make sure it remains upright on its safety stand instead of lying on its side.
7. Never touch the nozzle. Flush with cold water immediately if any contact.
8. Never pull the glue stick out from the back of the glue gun. Please keep the partially-melted glue sticks stay inside the glue gun without pulling it out.
9. Please keep glue gun away from reach of children and pets.


Glue Gun 40W
related products
  • Swivel Head Pin Vise
    Product NO456.500
    read more
    Swivel Head Pin Vise

    [Specifications]:

    Length: 95mm
    Handle Dia.: 8mm
    Collet Capacity: 0.3mm ~ 1.0mm / 1.0mm ~ 1.7mm / 1.7mm ~ 2.4mm / 2.4mm ~ 3.2mm
    Material: Aluminum

    [Features]:

    ◆ Tool for modeling, craft, jewelry design and watch repair.
    ◆ Used together with drill bits for drilling holes in wood, plastic, amber, metals and other materials.
    ◆ 1 spare drill bit included.
    ◆ Knurled handle for better and anti-slip control.
    ◆ Swivel head for smooth operation.
    ◆ Collets are well stored inside the barrel when not in use.
  • Pin Vise, 4 Collet Sizes
    Product NO456.501
    read more
    Pin Vise, 4 Collet Sizes

    [Specifications]:

    Length: 100mm
    Collet Capacity: 0.3mm ~ 1.0mm / 1.0mm ~ 1.7mm / 1.7mm ~ 2.4mm / 2.4mm ~ 3.2mm (4 collet sizes)
    Handle Dia.: 8mm
    Material: Aluminum

    [Features]:

    ◆ Tool for modelling, craft, jewelry design and watch repair.
    ◆ Used together with drill bits for drilling holes in wood, plastic, amber, metals and other materials.
    ◆ Knurled handle for better and anti-slip control.
  • Octopus KT-603 Flush Cutter 3 1/2
    Product NO503.603
    read more
    Octopus KT-603 Flush Cutter 3 1/2", Taper & Relieved Head

    [Specifications]:

    Length: 3-1/2"(90mm)
    Material: Stainless Steel
    Cutting Capacity: Iron Wireφ0.8mm / Copper Wireφ2.0mm
    Hardness: Blade HRC 53±2
    Weight: 42g

    [Features]:

    ◆ Ideal for wire harnesses especially useful in cutting zip ties, leaving a flush and flat surface with no sharp ends to increase safety.
    ◆ Perfect for cutting head pins, eye pins, jump rings and chains in jewelry making. Using this cutter to get flush end and flat edge for the wires that you're working on.
    ◆ Great tool for cutting in plastic models without causing brittle plastic burrs.
    ◆ Spring-loaded to prevent fatigue when in prolonged use.
    ◆ Made of Stainless Steel to prevent rust.
  • Craft Knifes w/ 6 Available Blades
    Product NO432.120
    read more
    Craft Knifes w/ 6 Available Blades

    ◆ Material: Aluminum Handle + Refined Copper
    ◆ Craft Knifes for mat cutting, model making, etching, carving, scoring, trimming.
    ◆ With replaceable blades
    ◆ Length: 150mm
    ◆ Please be careful when using.
Top