Flush Cutter Side Cutter Pliers 5", 2.5mm Thickness, For Wire Under 1.6mm

Octopus KT-12 Flush Cutter 5", Taper & Relieved Head

[Specifications]:

Length: 5"(125mm)
Material: Carbon Steel
Cutting Capacity: Copper Wireφ1.3mm
Weight: 64g

[Features]:

◆ Ideal for wire harnesses especially useful in cutting zip ties, leaving a flush and flat surface with no sharp ends to increase safety.
◆ Perfect for cutting head pins, eye pins, jump rings and chains in jewelry making. Using this cutter to get flush end and flat edge for the wires that you're working on.
◆ Great tool for cutting in plastic models without causing brittle plastic burrs.
◆ Its slim profile allows it have better access to hard-to-reach area and makes it an excellent tool to cut lead components on dense PCB or handle intricate work.
◆ Spring-loaded to prevent fatigue when in prolonged use.
◆ Black oxide surface treatment and the blades are oiled to prevent rust.

Octopus KT-25 Flush Cutter 5", Taper & Relieved Head

[Specifications]:

Length: 5"(125mm)
Material: Carbon Steel
Cutting Capacity: Copper Wireφ1.3mm
Weight: 65g

[Features]:

◆ Ideal for wire harnesses especially useful in cutting zip ties, leaving a flush and flat surface with no sharp ends to increase safety.
◆ Perfect for cutting head pins, eye pins, jump rings and chains in jewelry making. Using this cutter to get flush end and flat edge for the wires that you're working on.
◆ Great tool for cutting in plastic models without causing brittle plastic burrs.
◆ Its slim profile allows it have better access to hard-to-reach area and makes it an excellent tool to cut lead components on dense PCB or handle intricate work.
◆ Spring-loaded to prevent fatigue when in prolonged use.
◆ Black oxide surface treatment and the blades are oiled to prevent rust.

Long Nose Electronics Pliers Serrated with Cutter 6" Octopus KT-31

[Specifications]:

Length: 6" (155 mm)
Weight: 72g
Application: Electronics
Joint Type: Single Joint
Tips: Half Round
Cutting Capacity: Up to 1.0mm Steel Wire, Up to 1.3mm Copper Wire
Gripping: Serrated
Spring-loaded: Yes
Handle: non-slip rubber
Material: SK7 High Carbon Steel

[Features]:

These pairs of long nose pliers are useful especially when users needs more friction to hold small workpieces. The serrated surface on jaws helps increase gripping and clamping force.

Wire gripping and bending is usually followed by the step of cutting. In light of this workflow, S-Turbo supplies long nose pliers that are equipped with cutter in jaws to make these pliers more versatile.

◆ Slim jaws for hard-to-reach spot.
◆ The handle is made of non-slip rubber which makes gripping more firmly.

Flush Cutter Side Cutter Pliers 5", 3.0mm Thickness

◆ Length: 5"
◆ 2 colors TPR handles reduce fatigue
◆ Ideal for copper wire below dia. 1.6mm, not for steel wire
◆ With spring
◆ Weight: 78g

Octopus KT-A05 Diagonal Cutting Pliers 5", Semi-Flush Cut, Oval Head

[Specifications]:

Length: 5"(125mm)
Material: CRV SAE6140( Cr-V Steels )
Body: HRC 43-45
Blade: HRC 60±2
Cutting Capacity: Iron Wireφ1.5mm / Copper Wireφ2.0mm
Weight: 72g

[Features]:

◆ Though resulting in more pronounced edge than a flush cutter leaves on wires, this tool is more durable in terms of holding its edge.
◆ Its great cutting capacity can cut up to diameter 1.5mm iron wire.
◆ With screw stopper on the side so the pliers don't open all the way.
◆ Spring-loaded to prevent fatigue when in prolonged use.
◆ The blades are oiled to prevent rust.
◆ Plastic-dipped handles for comfort in your palm.
◆ Drop forged and heat treated steel construction.

Micro Nippers 125mm NS-03

◆ Ideal for small PCB related work
◆ With opening angle adjuster
◆ Material : S58C
◆ Hardness: HRC 58±4
◆ Cutting capacity: copper wire φ1.4mm
◆ With spring
◆ Overall Length: 125mm
◆ Grip Width: 52mm
◆ Jaw Width: 13mm
◆ Jaw Thickness: 7mm
◆ Blade Length: 14mm